aligning an SAS'd rig

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: aligning an SAS'd rig [Re: eightyeight] #755781 10/06/06 04:55 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Alignment technique I use:
- http://www.4crawler.com/4x4/CheapTricks/AxleTech/index.shtml#Alignment

with link to factory alignment specs. I run a little more caster than stock on mine as well, maybe about 1 degree more with the longer spring shackle.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
aligning an SAS'd rig	eightyeight	10/05/06 02:35 AM
Re: aligning an SAS'd rig	ErikB	10/05/06 03:53 PM
Re: aligning an SAS'd rig	dcg9381	10/05/06 09:55 PM
Re: aligning an SAS'd rig	4Crawler	10/05/06 10:02 PM
Re: aligning an SAS'd rig	lethe	10/05/06 11:49 PM
Re: aligning an SAS'd rig	eightyeight	10/06/06 04:22 AM
Re: aligning an SAS'd rig	4Crawler	10/06/06 04:55 AM
Re: aligning an SAS'd rig	dcg9381	10/06/06 05:25 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 5.018s Queries: 16 (3.589s) Memory: 0.6096 MB (Peak: 0.6426 MB) Data Comp: Off Server Time: 2026-06-11 09:47:13 UTC
Valid HTML 5 and Valid CSS