|
|
|
|
 Fel-Pro gaskets with print-a-seal on them
#756040
10/06/06 05:20 AM
|
Joined: Sep 2006
Posts: 22
OP
Need a Spot
|
I have never had a gasket with this print-a-seal stuff on it before. Does it mean that I don't use rtv on that side of the gasket?
|
|
|
Re: Fel-Pro gaskets with print-a-seal on them
[Re: Mikeweb]
#756041
10/06/06 05:52 AM
|
Joined: Oct 2004
Posts: 1,270
Body Damage is Cool
|
if its the intake gaskets then you dont need any but if you have any doubts about the sealing surface a little smudgin never hurt
91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
|
|
|
Re: Fel-Pro gaskets with print-a-seal on them
[Re: Mikeweb]
#756042
10/06/06 07:29 AM
|
Joined: Sep 2006
Posts: 22
OP
Need a Spot
|
Yes, it is the intake gasket. I just hadn't encountered the gasket with a preprinted seal on it before. Thank you for clearing that up for me.
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 3.261s Queries: 15 (0.003s) Memory: 0.5913 MB (Peak: 0.6443 MB) Data Comp: Off Server Time: 2026-06-07 09:35:59 UTCValid HTML 5 and Valid CSS 
