Leaky Intake Manifold

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Leaky Intake Manifold #757585 10/13/06 05:21 PM

Joined: Mar 2006

Posts: 38

SW Alaska

sled207

Getting the Wheeling Fever

Hey Folks
Does anybody have the torque values for the intake manifold on a 90 Montero 3L. I put a new intake gasket on because the old one was leaking, but I can't get the new one to seal. Thanks for the help.

Entire Thread
Subject	Posted By	Posted
Leaky Intake Manifold	sled207	10/13/06 05:21 PM
Re: Leaky Intake Manifold	pcc	10/13/06 06:07 PM
Re: Leaky Intake Manifold	sled207	10/13/06 06:28 PM
Re: Leaky Intake Manifold	pcc	10/13/06 07:56 PM
Re: Leaky Intake Manifold	sled207	10/13/06 08:48 PM
Re: Leaky Intake Manifold	FrankR	10/14/06 12:04 AM
Re: Leaky Intake Manifold	fasteddy	10/14/06 03:02 AM
Re: Leaky Intake Manifold	dadrab	10/16/06 01:42 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.820s Queries: 15 (3.817s) Memory: 0.6062 MB (Peak: 0.6392 MB) Data Comp: Off Server Time: 2026-06-24 12:11:56 UTC
Valid HTML 5 and Valid CSS