|
|
|
|
 Re: I need final suspension answer
[Re: muddermontero]
#757962
10/16/06 01:49 AM
|
Joined: Jan 2001
Posts: 3,876
Roll Me Over
|
I dont know how much lift I have but I think it is more then 2.5 . I did cut my bumpstops as you suggested to get more out of it. Then the tops of my wheels leaned in after I cranked them real far. So I changed my upper control arms to 96 montero upper control arms and that allowed more lift and leveled my wheels out. Still though 35s I think are the biggest I have seen on any trucks in the US.
Or if you want more you might try a lift kit. Sadly I dont know the name of it but a guy on this forum by the Name of DC has it on his Montero Sport. It to may fit a gen 1 but I dont know. I think you could fit 37s easily then.
89 2dr 3.0 AT, manual hubs. 33x12.5 MT gen 2 coils,Cranked front tbars Dons rocker protection, Front/Rear Bumpers. ARB rear locker, 2" BL, Beefed up skid plates/trailing arms. Gen II uca, 2 Bouncy seats www.youtube.com/TagGeorge
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.144s Queries: 15 (4.142s) Memory: 0.6046 MB (Peak: 0.6376 MB) Data Comp: Off Server Time: 2026-10-27 15:32:08 UTCValid HTML 5 and Valid CSS 
