timing belt

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: timing belt [Re: FrankR] #758162 10/16/06 01:46 PM

Joined: Dec 2000

Posts: 6,896

Ponchatoula, LA

sparkem

Trail Leader

Woo, I was right on the ECU thing. Yeah, like Frank said, remove the plastic timing cover on the driverside. That is the easiest. Just 2 10mm head bolts. Could it possibly be the idler pulley bearings? Are all the belts tight?

I just want to tell you both good luck, and we're all counting on you.

Entire Thread
Subject	Posted By	Posted
timing belt	sparky101	10/16/06 08:59 AM
Re: timing belt	FrankR	10/16/06 12:02 PM
Re: timing belt	sparkem	10/16/06 01:46 PM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.889s Queries: 16 (3.887s) Memory: 0.5969 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-06-24 11:57:54 UTC
Valid HTML 5 and Valid CSS