Disconnecting plug wires to check for bad cylinder

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Disconnecting plug wires to check for bad cylinder [Re: ONEOFAKIND] #758535 10/17/06 04:25 AM

Joined: Apr 2000

Posts: 7,268

Ventura County

mlclark

Isuzu Moderator

It only works if you are trying to find an IGNITION based problem.

Time to get out the compression gauge.

Michael

Entire Thread
Subject	Posted By	Posted
Disconnecting plug wires to check for bad cylinder	ONEOFAKIND	10/17/06 04:06 AM
Re: Disconnecting plug wires to check for bad cylinder	mlclark	10/17/06 04:25 AM
Re: Disconnecting plug wires to check for bad cylinder	ONEOFAKIND	10/17/06 04:42 AM
Re: Disconnecting plug wires to check for bad cylinder	trooperbc	10/17/06 05:38 AM
Re: Disconnecting plug wires to check for bad cylinder	strawmyers	10/17/06 12:02 PM
Re: Disconnecting plug wires to check for bad cylinder	trooperbc	10/18/06 06:45 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.471s Queries: 16 (3.469s) Memory: 0.6033 MB (Peak: 0.6363 MB) Data Comp: Off Server Time: 2026-06-10 11:19:32 UTC
Valid HTML 5 and Valid CSS