quick timing Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

quick timing Q #759093 10/18/06 06:22 PM

Joined: Apr 2002

Posts: 1,156

Coeurdalene ID

bob large

Body Damage is Cool

So IÆm setting up timing on my 2.6.

I have crank at TDC
I have the cam shaft sprocket pointing straight up at the mark.

And I have the distributor at #4

Is that right?

Steve C

Entire Thread
Subject	Posted By	Posted
quick timing Q	bob large	10/18/06 06:22 PM
Re: quick timing Q	RobG	10/18/06 06:29 PM
Re: quick timing Q	bob large	10/18/06 08:31 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.501s Queries: 15 (3.498s) Memory: 0.5950 MB (Peak: 0.6279 MB) Data Comp: Off Server Time: 2026-06-08 09:05:47 UTC
Valid HTML 5 and Valid CSS