Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
20 gauge sheet metal #759369 10/19/06 03:28 PM
Joined: Mar 2005
Posts: 185
8
87YotaLac Offline OP
Wheeler
Where can I buy some 20 gauge paintable sheet metal? I'm fixing to repair some rust holes on my 4runner.


1985 4runner Bone stock
Re: 20 gauge sheet metal [Re: 87YotaLac] #759370 10/19/06 04:33 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Many of the hardware stores carry a selection of steel sheet and shapes. Here is an on-line place that sells 20ga. sheet.

Re: 20 gauge sheet metal [Re: 4Crawler] #759371 10/19/06 04:43 PM
Joined: Sep 2003
Posts: 1,686
Staceman Offline
Body Damage is Cool
I've seen guys use the sheet metal from old computer case covers for this purpose. Don't know the average thickness.
But, I had my fender off over last week-end beating it into shape. I think some PC cases are actually thicker? That fender sure wasn't much.


85 4Runner - With NEW Marlin 4.7 Gears!! It's a whole new beast!
Re: 20 gauge sheet metal [Re: Staceman] #759372 10/19/06 05:17 PM
Joined: Aug 2006
Posts: 215
subliminaltrips Offline
Wheeler
check your local yellow pages under sheet metal or metal supply. lowes carries sheet metal too but its over priced.

Re: 20 gauge sheet metal [Re: subliminaltrips] #759373 10/19/06 07:08 PM
Joined: Mar 2005
Posts: 185
8
87YotaLac Offline OP
Wheeler
While diggin around online I saw people mentioning "paint grip" sheet metal. Is there a difference between that and regular sheet metal?


1985 4runner Bone stock
Re: 20 gauge sheet metal [Re: 87YotaLac] #759374 10/19/06 07:40 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
http://www.ctmrs.com/colors/paintgrip.shtml

Looks like you can get the same effect with a phosphoric acid etch like POR-15 Metal Ready.

Re: 20 gauge sheet metal [Re: 4Crawler] #759375 10/19/06 09:57 PM
Joined: Mar 2005
Posts: 185
8
87YotaLac Offline OP
Wheeler
Thanx for the info, I might try the metal prep stuff.


1985 4runner Bone stock
Re: 20 gauge sheet metal [Re: 87YotaLac] #759376 10/19/06 10:28 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
You can also use something like CLR or Lime Away (bathroom cleaners).


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 1.121s Queries: 15 (0.012s) Memory: 0.6233 MB (Peak: 0.7217 MB) Data Comp: Off Server Time: 2026-07-17 07:40:01 UTC
Valid HTML 5 and Valid CSS