94' 4Bummer - Blown head gasket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 94' 4Bummer - Blown head gasket [Re: Hugh] #759470 10/21/06 02:07 PM

Joined: Aug 2005

Posts: 229

Kansas

Kutter

Wheeler

How about camshaft seals. Ofcourse new head bolts if you didn't already know.
You really don't have to remove the engine to do this work. I just did one two weeks ago and left the engine in the truck. Less work.
I used a kit from ebay. http://cgi.ebay.com/ebaymotors/TOYO...yZ33617QQihZ003QQitemZ130037743121QQrdZ1

1995 4Runner Limited V6 3.4 Liter 5 Speed 4x4
1995 4Runner V6 Auto 2WD

Entire Thread
Subject	Posted By	Posted
94' 4Bummer - Blown head gasket	Hugh	10/20/06 12:06 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	10/20/06 11:46 PM
Re: 94' 4Bummer - Blown head gasket	Kutter	10/21/06 02:07 PM
Re: 94' 4Bummer - Blown head gasket	kewlynx	10/23/06 08:23 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	10/26/06 12:11 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	11/01/06 12:29 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.598s Queries: 16 (3.596s) Memory: 0.6021 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-06-16 14:15:56 UTC
Valid HTML 5 and Valid CSS