94' 4Bummer - Blown head gasket

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 94' 4Bummer - Blown head gasket [Re: Hugh] #759473 11/01/06 12:29 AM

Joined: Jan 2004

Posts: 98

Santa Cruz, CA

Hugh

Getting the Wheeling Fever

Update 10/31/06: I dropped off the motor today at the machine shop. With a special jig made for this 3.0L, they are able to deck the block without removing the pistons, rods and crank. No other shop could do this work without a complete tear down. The motor should be ready tomorrow <img src="/forums/images/graemlins/cheers.gif" alt="" />

--Hugh

94' 4Runner SR5 3.0L, 4X4, 5-speed, 200K

01' Sienna XLE, 105K, auto everything...

91' Ford F-250, 7.3 liter IDI diesel, 5-speed, 170K

Entire Thread
Subject	Posted By	Posted
94' 4Bummer - Blown head gasket	Hugh	10/20/06 12:06 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	10/20/06 11:46 PM
Re: 94' 4Bummer - Blown head gasket	Kutter	10/21/06 02:07 PM
Re: 94' 4Bummer - Blown head gasket	kewlynx	10/23/06 08:23 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	10/26/06 12:11 AM
Re: 94' 4Bummer - Blown head gasket	Hugh	11/01/06 12:29 AM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.490s Queries: 16 (3.488s) Memory: 0.6035 MB (Peak: 0.6365 MB) Data Comp: Off Server Time: 2026-06-14 22:31:14 UTC
Valid HTML 5 and Valid CSS