|
|
|
|
31x10x15 on a stock 15x6??
#760316
10/24/06 03:03 PM
|
Joined: Oct 2006
Posts: 26
OP
Getting the Wheeling Fever
|
Is this setup possible? Found a good deal I would hate to pass up.
|
|
Re: 31x10x15 on a stock 15x6??
[Re: Robb]
#760317
10/24/06 03:36 PM
|
Joined: Dec 2000
Posts: 6,896
Trail Leader
|
Search and Yes it will fit.
I just want to tell you both good luck, and we're all counting on you.
|
|
Re: 31x10x15 on a stock 15x6??
[Re: sparkem]
#760318
10/24/06 04:31 PM
|
Joined: Feb 2006
Posts: 72
Getting the Wheeling Fever
|
Had 'em on my '95 LS for 150,000 miles.It works great
1995 Montero LS, KYBs, Michelin 31s. 2009 Kia Borrego EX. (Wife's wheels.)
|
|
Re: 31x10x15 on a stock 15x6??
[Re: Robb]
#760319
10/24/06 04:58 PM
|
|
Anonymous
Unregistered
|
Look at the pictures on my Homepage. My Montero has that setup right now, however I am going to be getting 33/12.5/15 but on a 10" rim in the future.
|
|
Re: 31x10x15 on a stock 15x6??
#760320
10/24/06 08:34 PM
|
Joined: Jul 2005
Posts: 2,088
Body Damage is Cool
|
That is the general guide. But 31's are common on the 15x6 rim. Some have even went to 32's, but its pushing it. 33's and up defiently need a wider rim. So you should be fine. <img src="/forums/images/graemlins/cheers.gif" alt="" />
88 Raider(Red):160k-Reman'd 2.6-5spd-Weber-SW Hubs-34x9.5 TSL-OffRd Pkg-1"Tbar-2"BL-CB 88 Raider(Silver):No 2.6/Bad KM145 Parts/Project 88 Montero(Brown):No 2.6,4.88s Parts/Project [b]4X4 STICKERS,SHIRTS,ETC: 4WD Stickers AT COST.[b]
|
|
Re: 31x10x15 on a stock 15x6??
[Re: DRaider90]
#760321
10/24/06 08:38 PM
|
Joined: Jan 2003
Posts: 1,741
Body Damage is Cool
|
i had 31's on my stack rims.the only problem is some tire shops wont mount thst wide of a tire on that norrow a rim but i found one that would.i never had a problem.
87 dodge power ram 50,35" tires,5 1/2" total lift,4.6 gears,lockers front and rear,Rancho RS5000's,custom front bumper,custom rock sliders,cct extended diff breathers,75 amp alt(40 amp stock),thorely header,K&N,wheeled hard...
|
|
Re: 31x10x15 on a stock 15x6??
[Re: powerRam50]
#760322
10/24/06 09:02 PM
|
Joined: Oct 2006
Posts: 26
OP
Getting the Wheeling Fever
|
Thanks for the great info!
|
|
Re: 31x10x15 on a stock 15x6??
[Re: Robb]
#760323
10/25/06 12:06 AM
|
Joined: Dec 2000
Posts: 6,896
Trail Leader
|
I ran 32x11.5 on my stock 6in for a couple years, no problems.
I just want to tell you both good luck, and we're all counting on you.
|
|
|
|
|
|