Toyota axle knuckle rotation

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Toyota axle knuckle rotation [Re: 4runnerchevy] #760483 04/07/07 10:13 PM

Joined: Apr 2007

Posts: 12

Santa Cruz

4runnerchevy Offline

Need a Spot

The bearing cups (top and bottom of your knucks)are on the same plane as your spring perches so just relocate the perches to the same plane as your rotated knucks. Make sure you use a good 4" pipe cutter and do not cut too deep.

Entire Thread
Subject	Posted By	Posted
Toyota axle knuckle rotation	Anonymous	10/25/06 02:53 PM
Re: Toyota axle knuckle rotation	84YOTA	04/01/07 07:27 AM
Re: Toyota axle knuckle rotation	4runnerchevy	04/07/07 10:05 PM
Re: Toyota axle knuckle rotation	4runnerchevy	04/07/07 10:13 PM

Moderated by 4x4Wire, PHIL_

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.461s Queries: 16 (3.459s) Memory: 0.5979 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-06-09 12:21:47 UTC
Valid HTML 5 and Valid CSS