K&N Induction Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: K&N Induction Question [Re: azrain] #760562 10/26/06 04:36 PM

Joined: Aug 2004

Posts: 34

East Valley, Az

AzStealth

Getting the Wheeling Fever

Thanks guys! Interestingly diverse opinions.

If the 4.0 is fairly well optimized from the factory, it does stand to reason that there will be few, if any "simple" mods that will yield significant power gains.

Will do more research before taking any action.

Entire Thread
Subject	Posted By	Posted
K&N Induction Question	AzStealth	10/25/06 07:18 PM
Re: K&N Induction Question	BIGBURLYNAKEDMAN	10/25/06 07:28 PM
Re: K&N Induction Question	BIGBURLYNAKEDMAN	10/25/06 07:31 PM
Re: K&N Induction Question	pburruel	10/26/06 01:30 AM
Re: K&N Induction Question	azrain	10/26/06 05:46 AM
Re: K&N Induction Question	AzStealth	10/26/06 04:36 PM
Re: K&N Induction Question	Greg_Canada	10/28/06 06:12 PM

Moderated by 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.441s Queries: 16 (3.439s) Memory: 0.6051 MB (Peak: 0.6381 MB) Data Comp: Off Server Time: 2026-05-30 09:04:55 UTC
Valid HTML 5 and Valid CSS