Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 3 of 5 1 2 3 4 5
Re: Skid plate blueprint, anyone? [Re: logansportage] #760835 12/01/06 05:08 PM
Joined: Apr 2002
Posts: 1,221
logansportage Offline
Body Damage is Cool
FYI,

www.kiaparts.com has

FUEL TANK, Sportage, From 11/11/95, 4 Door 98-02 MSRP $205.80 your price $150.61.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />


White 1998 4 door KIA Sportage 4x4 w/Eibach 2.5 spring lift and TJ rear coils, 4crawler 1.5 body lift, Monroe Sensa.trac shocks, Bosch 4+ plugs, Eaton LSD, 31x10.5x15 BFG KM tires, 2.5 cat back exhaust w/SpinTech muffler
Re: Skid plate blueprint, anyone? [Re: logansportage] #760836 12/02/06 04:03 AM
Joined: Jun 2006
Posts: 331
T
turtleskia Offline
Mudrunner
i haven't changed the tanks yet, but i got the new one from the stealership. i couldn't wait a week or two for one from kiaparts.com. my brother is going to be here this weekend, he's going to help me change it out. i'll take pics and try to post them soon. the crack was about a quarter inch in length and doesn't just drip it squirts almost 3 gallons a day. the crack is in the middle of a bend on the bottom of the tank, not far from the drain hole. anyway, on a good note, i passed my final exam for entrance into management for the company i work for tonight, and should be on a little more often than once a month now. it's good to be missed, i figured no one would care that i was gone. later. <img src="/forums/images/graemlins/cheers.gif" alt="" />


95 sportage, gone and severly missed.
94 camaro 5-speed v6 with a few addons.
girlfriends 93 s-10 4.3 soon to be lifted and made into a pre-runner
Re: Skid plate blueprint, anyone? [Re: turtleskia] #760837 12/04/06 04:25 PM
Joined: Apr 2002
Posts: 1,221
logansportage Offline
Body Damage is Cool
Thanks, and CONGRATS on passing the exam!!!

I'll be pulling my skid plate off to locate the crack in mine as soon as I can find enough time and a warm location to do it in.

Been rather cold here lately and time will be freeing up a little bit with the X-mas holiday rapidly approaching.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />


White 1998 4 door KIA Sportage 4x4 w/Eibach 2.5 spring lift and TJ rear coils, 4crawler 1.5 body lift, Monroe Sensa.trac shocks, Bosch 4+ plugs, Eaton LSD, 31x10.5x15 BFG KM tires, 2.5 cat back exhaust w/SpinTech muffler
Re: Skid plate blueprint, anyone? [Re: Platarg814] #760838 12/21/06 03:08 PM
Joined: Oct 2006
Posts: 48
Platarg814 Offline OP
Getting the Wheeling Fever
OK, so I know it's been a while, but so you don't think I forgot or that I'll disappear like seems to happen a lot around here...I just shipped the prototype front skidplate to Hydra747 for testing (since I can't do it myself right now) so I can be sure the print is right. This a stock replacement piece, only thicker. Don't count on a fuel tank plate until...at least April when I can get outside a bit more and do actual fitup and stuff. Until then, not to put any pressure on you Hydra, but it's all on you, man! (oh yeah, and check your email) <img src="/forums/images/graemlins/baby.gif" alt="" />

Re: Skid plate blueprint, anyone? [Re: logansportage] #760839 12/21/06 04:05 PM
Joined: Feb 2003
Posts: 2,243
DamKia Offline
Kia Moderator
Quote
Thanks, and CONGRATS on passing the exam!!!

I'll be pulling my skid plate off to locate the crack in mine as soon as I can find enough time and a warm location to do it in.

Been rather cold here lately and time will be freeing up a little bit with the X-mas holiday rapidly approaching.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />


Plenty warm over here....almost a million hectares (2.5 million acres = ~60 miles square) burnt out in our states east over the last couple of weeks, so smokey they couldn't get "Elvis" or any other air support flying due to low visibility (at times less than 400 yards in the capital city, 150 miles away!!!).

Is there any chance of making a PDF diagram of this new bashplate, showing folds/welds/holes/mounts, etc???


2002 Sporty , Ironman 2.5" spring, 2" body, 15 x 7 ROH wheels, K&N, 15 x 10.5 Simex Centipedes, Powerchip 91.

"Never argue with an idiot. They will bring you down to their level then beat you with experience!"
Re: Skid plate blueprint, anyone? [Re: DamKia] #760840 12/21/06 04:17 PM
Joined: Feb 2005
Posts: 402
Cen_Tex_KIA Offline
Mudrunner
yes, please copy us all on that! <img src="/forums/images/graemlins/kewl.gif" alt="" />


2000 KIA Sportage 4x4, Sadly Smushed! Now a 2001 Cheep Jerokee. 3" Rough Country Lift, 255/70/16 General AT2's
http://www.cardomain.com/ride/2292811
Re: Skid plate blueprint, anyone? [Re: DamKia] #760841 12/21/06 04:37 PM
Joined: Jun 2006
Posts: 3,814
Hydra747 Offline
Roll Me Over
*
Quote

Is there any chance of making a PDF diagram of this new bashplate, showing folds/welds/holes/mounts, etc???

No, that would be overkill. It's a simple plate guard for Lords sake <img src="/forums/images/graemlins/zombie.gif" alt="" /> You will get Your Specs /info. and lots of photos. All those interested keep an alert eye open <img src="/forums/images/graemlins/smile.gif" alt="" /> It should be interesting ........ <img src="/forums/images/graemlins/kewl.gif" alt="" />

Re: Skid plate blueprint, anyone? [Re: Hydra747] #760842 12/21/06 07:20 PM
Joined: Apr 2002
Posts: 1,221
logansportage Offline
Body Damage is Cool
Hydra,

Please keep me in the loop. I'd like one of these.

OH, BTW, HAPPY BIRTHDAY! <img src="/forums/images/graemlins/cheers.gif" alt="" /> TODAY IS YOUR BIRTHDAY IF YOU FORGOT. <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/butwiggle.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" />

Your name has a birthday cake next to it indicating your birthday is today.

Logansportage <img src="/forums/images/graemlins/patriot.gif" alt="" />

Last edited by logansportage; 12/21/06 07:22 PM.

White 1998 4 door KIA Sportage 4x4 w/Eibach 2.5 spring lift and TJ rear coils, 4crawler 1.5 body lift, Monroe Sensa.trac shocks, Bosch 4+ plugs, Eaton LSD, 31x10.5x15 BFG KM tires, 2.5 cat back exhaust w/SpinTech muffler
Re: Skid plate blueprint, anyone? [Re: logansportage] #760843 12/21/06 09:16 PM
Joined: Jun 2006
Posts: 3,814
Hydra747 Offline
Roll Me Over
*
Darn, u have an eye for detail!!!!!!thanks Logan. Ya, I'm 29 and holding!!!! <img src="/forums/images/graemlins/smile.gif" alt="" /> <img src="/forums/images/graemlins/patriot.gif" alt="" />

Re: Skid plate blueprint, anyone? [Re: Hydra747] #760844 12/22/06 04:46 PM
Joined: Jun 2006
Posts: 3,814
Hydra747 Offline
Roll Me Over
*
Yes i'm not really 29 but I'm still holding! <img src="/forums/images/graemlins/lol.gif" alt="" /> When I get the material I'll post updated info....Thanks all <img src="/forums/images/graemlins/patriot.gif" alt="" />

Page 3 of 5 1 2 3 4 5

Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 16 (0.005s) Memory: 0.6445 MB (Peak: 0.7682 MB) Data Comp: Off Server Time: 2026-06-03 07:54:26 UTC
Valid HTML 5 and Valid CSS