bent crossmember

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

bent crossmember #760886 10/26/06 05:11 PM

Joined: Mar 2006

Posts: 46

SPRaYeD

Getting the Wheeling Fever

i bent the crossmember that the driveshaft and exhaust goes through on my first gen trooper. anybody have any experience with fixing this? anybody replace this crossmember with something else?

Entire Thread
Subject	Posted By	Posted
bent crossmember	SPRaYeD	10/26/06 05:11 PM
Re: bent crossmember	ISueYou	10/27/06 03:19 AM
Re: bent crossmember	mlclark	10/27/06 04:59 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.559s Queries: 15 (3.557s) Memory: 0.5961 MB (Peak: 0.6290 MB) Data Comp: Off Server Time: 2026-06-14 19:59:41 UTC
Valid HTML 5 and Valid CSS