|
|
 Re: Project ....... 4SKIN
[Re: CJM]
#761828
11/03/06 08:47 PM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Any home DIY'er can do them, they're not taht hard.
Cut the old ones off, line the new ones up (this is the hardest part) glue them on.
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: Project ....... 4SKIN
[Re: Greg_Canada]
#761829
11/04/06 01:22 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
got the old doors striped ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/IM001651.jpg) ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/IM001652.jpg) and the mirror holes drilled , I had to install the vent windows , in order to locate the holes .. drilled and "nutcerts" installed . front fenders on , done ... ready for paint .  ya hooo ![[Linked Image]](http://i76.photobucket.com/albums/j2/bj_bumperboy/IM001650.jpg) gawd ... I hate those bumpers ...
|
|
|
Re: Project ....... 4SKIN
[Re: CJM]
#761830
11/04/06 04:48 AM
|
Joined: Jul 2002
Posts: 1,674
Body Damage is Cool
|
Are those reflections or custom molded ridges on the center part of the hood?
|
|
|
Re: Project ....... 4SKIN
[Re: CJM]
#761831
11/04/06 04:51 AM
|
Joined: Jan 2002
Posts: 1,617
Body Damage is Cool
|
I don't understand what you did with the doors. It looked like you had a perfect set a couple of postings back. That last one looked too rusty. -- Matt
'89 4runner SR5, 3.0, auto (fun)
'93 xtra cab, dlx,3.0, 5spd (work truck)
|
|
|
Re: Project ....... 4SKIN
[Re: matts]
#761832
11/04/06 05:24 AM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
Are those reflections or custom molded ridges on the center part of the hood? dust and reflection ... its a stock hood . I don't understand what you did with the doors. It looked like you had a perfect set a couple of postings back. That last one looked too rusty. -- Matt the "good" doors are new .... the rusty ones are the old ones , I had to transfer the hardware .
|
|
|
Re: Project ....... 4SKIN
[Re: CJM]
#761833
11/04/06 06:13 AM
|
Joined: Jan 2002
Posts: 1,617
Body Damage is Cool
|
Where do you get new doors and who makes them? -- Matt
'89 4runner SR5, 3.0, auto (fun)
'93 xtra cab, dlx,3.0, 5spd (work truck)
|
|
|
Re: Project ....... 4SKIN
[Re: matts]
#761834
11/04/06 09:03 AM
|
Joined: Aug 2003
Posts: 2,854
Roll Me Over
|
Cross Country... or Cross Canada.. i think thats what they're called.... you can get them from any CMAX/ NAPA.... or any place that orders from ekeystone....
89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim
|
|
|
Re: Project ....... 4SKIN
[Re: matts]
#761835
11/04/06 05:58 PM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
Where do you get new doors and who makes them? -- Matt like Greg mentioned , but there are TONS of places in the USA http://www.autopartsbuy.com http://www.partstrain.com/ are just a couple .. There made in Tiwan , so not the best of quality .
|
|
|
Re: Project ....... 4SKIN
[Re: CJM]
#761836
11/04/06 07:10 PM
|
Joined: Jan 2002
Posts: 1,617
Body Damage is Cool
|
Where do you get new doors and who makes them? -- Matt There made in Tiwan , so not the best of quality . That's what I was wondering. I have some Taiwan fenders. They fit OK except that the holes for the plastic nut inserts were too big. They've only seen one winter so far. Do you have any feeling how the Taiwan parts stand up to salt corrosion? I'm hoping thier epoxy primer is a good barrier. -- Matt
'89 4runner SR5, 3.0, auto (fun)
'93 xtra cab, dlx,3.0, 5spd (work truck)
|
|
|
Re: Project ....... 4SKIN
[Re: matts]
#761837
11/04/06 08:55 PM
|
Joined: Sep 2003
Posts: 1,856
OP
Body Damage is Cool
|
not well at all , well compared to the factory stuff ... Its usually a thinner guage steel , so it wont last as long . knowing this thought is 1/2 the battle .. you can actually or hopefully , look after them , rust treat them , and make sure there clean , and hopefully they will last .
These doors were really good .. the frames had to be bent back into shape , and the bottoms dont line perfect along the rockers , hood was a little off as well .. but replacing everything like this , i'm able to line up body lines .. I'm happy with the out come .
|
|
|
|
