Front Transmission seal Question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Front Transmission seal Question #762373 11/02/06 03:38 AM

Joined: Sep 2004

Posts: 132

North Texas

yota89

Wheeler

When looking at the housing from this side, which side of the seal should be facing me the smooth side or the spring side. The origianl seal was so bad it was completly gone, and I dont know which way it was installed.

Thanks

[Linked Image]

89 yota pickup
22RE 261C cam
Tanny / engine rebuilt after 256K
Head machined to RV street spec(EB's)

Entire Thread
Subject	Posted By	Posted
Front Transmission seal Question	yota89	11/02/06 03:38 AM
Re: Front Transmission seal Question	Davepet	11/02/06 06:41 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.758s Queries: 15 (3.756s) Memory: 0.5925 MB (Peak: 0.6255 MB) Data Comp: Off Server Time: 2026-05-30 00:25:16 UTC
Valid HTML 5 and Valid CSS