Head machining Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head machining Q [Re: Talon84X4] #762400 11/02/06 05:10 AM

Joined: Feb 2004

Posts: 1,379

boonies of NH

Scerb

Body Damage is Cool

When you say rocker assembly guides, do you mean the brass peices? If so, keep those in there.

The shop I use charges 60 bucks to resurface a yota head.

-Scerb

http://www.scerbfab.com/carb_faq.html

Entire Thread
Subject	Posted By	Posted
Head machining Q	Talon84X4	11/02/06 04:37 AM
Re: Head machining Q	Scerb	11/02/06 05:10 AM
Re: Head machining Q	Talon84X4	11/02/06 06:34 AM
Re: Head machining Q	Scerb	11/02/06 08:15 PM
Re: Head machining Q	engnbldr	11/02/06 10:52 PM
Re: Head machining Q	TexJeff87	11/02/06 10:57 PM
Re: Head machining Q	engnbldr	11/03/06 12:02 AM
Re: Head machining Q	TexJeff87	11/03/06 02:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.475s Queries: 16 (3.473s) Memory: 0.6073 MB (Peak: 0.6403 MB) Data Comp: Off Server Time: 2026-06-10 15:20:30 UTC
Valid HTML 5 and Valid CSS