Head machining Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head machining Q [Re: Scerb] #762401 11/02/06 06:34 AM

Joined: Aug 2005

Posts: 553

Talon84X4

Rock Warrior

Brass? <img src="/forums/images/graemlins/lol.gif" alt="" />

Guess I should clean it up a bit more, but yeah

Thanks for the info.

Another question, how long does this usually take? Asking because this is my DD, and classes don't wait for truck in pieces <img src="/forums/images/graemlins/notooth.gif" alt="" />

'84 PU low & slow
Central Valley Crawlers

Entire Thread
Subject	Posted By	Posted
Head machining Q	Talon84X4	11/02/06 04:37 AM
Re: Head machining Q	Scerb	11/02/06 05:10 AM
Re: Head machining Q	Talon84X4	11/02/06 06:34 AM
Re: Head machining Q	Scerb	11/02/06 08:15 PM
Re: Head machining Q	engnbldr	11/02/06 10:52 PM
Re: Head machining Q	TexJeff87	11/02/06 10:57 PM
Re: Head machining Q	engnbldr	11/03/06 12:02 AM
Re: Head machining Q	TexJeff87	11/03/06 02:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.525s Queries: 16 (3.522s) Memory: 0.6075 MB (Peak: 0.6405 MB) Data Comp: Off Server Time: 2026-06-11 17:30:46 UTC
Valid HTML 5 and Valid CSS