Head machining Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head machining Q [Re: Talon84X4] #762402 11/02/06 08:15 PM

Joined: Feb 2004

Posts: 1,379

boonies of NH

Scerb

Body Damage is Cool

Depends on how busy the shop is.. I've had them tell me it'll be ready next day, and then I've also had them tell me the next week. I think I even got a estimate from a different shop for a month once,, but I never used that shop because of that <img src="/forums/images/graemlins/rolleyes.gif" alt="" />

-Scerb

http://www.scerbfab.com/carb_faq.html

Entire Thread
Subject	Posted By	Posted
Head machining Q	Talon84X4	11/02/06 04:37 AM
Re: Head machining Q	Scerb	11/02/06 05:10 AM
Re: Head machining Q	Talon84X4	11/02/06 06:34 AM
Re: Head machining Q	Scerb	11/02/06 08:15 PM
Re: Head machining Q	engnbldr	11/02/06 10:52 PM
Re: Head machining Q	TexJeff87	11/02/06 10:57 PM
Re: Head machining Q	engnbldr	11/03/06 12:02 AM
Re: Head machining Q	TexJeff87	11/03/06 02:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.461s Queries: 16 (3.458s) Memory: 0.6076 MB (Peak: 0.6406 MB) Data Comp: Off Server Time: 2026-06-11 04:18:17 UTC
Valid HTML 5 and Valid CSS