Head machining Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head machining Q [Re: Talon84X4] #762403 11/02/06 10:52 PM

Joined: Jun 2003

Posts: 3,576

1800 acre island at the Oregon...

engnbldr

Roll Me Over

>>>*Most shops mount those face up, so they can align off the valve cover rail which should be square to the cam line, this is important with these engines.

The dowels wouldn't be in the way.

Typical cost in our shop is $45 currently, but the Portland area prices are the lowest in the Nation for machine work....*EB

*Beats the he** outa me!....*LOL**...

Entire Thread
Subject	Posted By	Posted
Head machining Q	Talon84X4	11/02/06 04:37 AM
Re: Head machining Q	Scerb	11/02/06 05:10 AM
Re: Head machining Q	Talon84X4	11/02/06 06:34 AM
Re: Head machining Q	Scerb	11/02/06 08:15 PM
Re: Head machining Q	engnbldr	11/02/06 10:52 PM
Re: Head machining Q	TexJeff87	11/02/06 10:57 PM
Re: Head machining Q	engnbldr	11/03/06 12:02 AM
Re: Head machining Q	TexJeff87	11/03/06 02:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.870s Queries: 16 (3.867s) Memory: 0.6085 MB (Peak: 0.6415 MB) Data Comp: Off Server Time: 2026-06-12 08:33:08 UTC
Valid HTML 5 and Valid CSS