Head machining Q

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Head machining Q [Re: engnbldr] #762404 11/02/06 10:57 PM

Joined: Aug 2004

Posts: 1,298

Dripping Springs, TX

TexJeff87

Body Damage is Cool

My local guys charge $60 to tank it and surface it. 24 hour turnaround.

Don't you have to compensate with a thicker head gasket or something to make up the difference? After my second HG failure, I blew the stocker off and got one from EB. Ready to use outa the box. Well, 'cept for lappin' the valves....

If Mad Max had a 4runner...

Entire Thread
Subject	Posted By	Posted
Head machining Q	Talon84X4	11/02/06 04:37 AM
Re: Head machining Q	Scerb	11/02/06 05:10 AM
Re: Head machining Q	Talon84X4	11/02/06 06:34 AM
Re: Head machining Q	Scerb	11/02/06 08:15 PM
Re: Head machining Q	engnbldr	11/02/06 10:52 PM
Re: Head machining Q	TexJeff87	11/02/06 10:57 PM
Re: Head machining Q	engnbldr	11/03/06 12:02 AM
Re: Head machining Q	TexJeff87	11/03/06 02:40 PM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.477s Queries: 16 (3.475s) Memory: 0.6076 MB (Peak: 0.6405 MB) Data Comp: Off Server Time: 2026-06-12 05:58:14 UTC
Valid HTML 5 and Valid CSS