|
|
|
|
 AMC Head
#762708
11/03/06 07:06 PM
|
Joined: Mar 2002
Posts: 417
OP
Mudrunner
|
I am planning on ordering an AMC head from Aluminum Head Rebuilders. I remember that he said that it doesn't come complete.
My question is, does anybody remember what they got with this head, and what I am going to have to purchase to install this head....ie. rockers, valves, valve springs, cam.
I just want to build it or have it built so i can just drop it on, of course after changing out the timing belt and the water pump.
Thanks
2000 Chevy Tahoe nothing special. 1990 Isuzu Amigo, 3" lift, 31x10.5x15 BFG All Terrain (Street), 33x12.5x15 (offroad), Pacesetter header, some ATM rash. More mods to come......
|
|
|
Re: AMC Head
[Re: Billdo]
#762709
11/03/06 07:31 PM
|
Joined: Aug 2000
Posts: 1,342
Body Damage is Cool
|
Should be complete with valves and springs. Add your camshaft and rockers and it should be ready to go.
|
|
|
Re: AMC Head
[Re: ShowMeDave]
#762710
11/03/06 10:16 PM
|
Joined: Mar 2002
Posts: 417
OP
Mudrunner
|
anybody know where I can get some non-oem rockers from?
2000 Chevy Tahoe nothing special. 1990 Isuzu Amigo, 3" lift, 31x10.5x15 BFG All Terrain (Street), 33x12.5x15 (offroad), Pacesetter header, some ATM rash. More mods to come......
|
|
|
Re: AMC Head
[Re: Billdo]
#762711
11/04/06 02:37 AM
|
Joined: Apr 2000
Posts: 7,268
Isuzu Moderator
|
anybody know where I can get some non-oem rockers from?
No and why?
Michael
|
|
|
Re: AMC Head
[Re: ShowMeDave]
#762712
11/06/06 08:10 PM
|
Joined: Jun 2004
Posts: 576
Rock Warrior
|
Should be complete with valves and springs. Add your camshaft and rockers and it should be ready to go. I paid $500 and got everything but the cam. Jim
1979 Pontiac Trans-Am - looking 4 a pontiac 455cid
1988 Trooper II - AMC head, .030 overbore, Calmini cam. Toga HV oil pump, Aisins, soon 2 b turbo
1989 Impulse Turbo - Fidanza flywheel, 270cc injectors, turbo-back exhaust, KYBs F/R
|
|
|
Re: AMC Head
[Re: Billdo]
#762713
11/07/06 03:53 PM
|
Joined: Dec 2004
Posts: 287
Mudrunner
|
anybody know where I can get some non-oem rockers from? I would try to get a head with atleast the rocker towers... From my experience mixing rockers from another head can create some problems. Right now my cam seal is leaking oil, I'd have to get it machined because it's making the seal oblong. If you got something that was line bored/machined in one unit you'll be in good shape. Since the towers are the cam journals anyway you'll know that the cam will be inline aswell.... Just my 0.2 cents...
B.Y.E. ~ Back Yard Engineering 
|
|
|
|
|
|
