transfer case ball detents

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

transfer case ball detents #762861 11/04/06 08:12 PM

Joined: Mar 2006

Posts: 46

SPRaYeD

Getting the Wheeling Fever

91 trooper, 2.8, 5 speed. Does anyone have any suggestions for getting the detent balls out of the transfer case? I tried a magnet but it's not strong enough. I'm just getting frustrated now. Any help will be appreciated.

Entire Thread
Subject	Posted By	Posted
transfer case ball detents	SPRaYeD	11/04/06 08:12 PM
Re: transfer case ball detents	strawmyers	11/04/06 08:30 PM
Re: transfer case ball detents	SPRaYeD	11/04/06 08:58 PM
Re: transfer case ball detents	SPRaYeD	11/04/06 09:50 PM
Re: transfer case ball detents	RubyTrooper	11/04/06 11:19 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.672s Queries: 15 (3.669s) Memory: 0.6004 MB (Peak: 0.6334 MB) Data Comp: Off Server Time: 2026-06-06 17:57:38 UTC
Valid HTML 5 and Valid CSS