Wiring LEDs, the right way.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Wiring LEDs, the right way. [Re: Robinhood150] #762899 11/06/06 05:03 PM

Joined: Aug 2001

Posts: 2,205

N. California

BoostedInline6 Offline

Body Damage is Cool

1.25 is the minimum output of the LM317 regulator and it is capable of regulating power up to 37 volts. So basically, the 1.25 is the "overhead" required to run the regulator.

Did you use a regulator, or just current-limiting resistors? If the latter, how much difference in brightness have you noticed with the engine off versus on?

Entire Thread
Subject	Posted By	Posted
Wiring LEDs, the right way.	BoostedInline6	11/05/06 12:23 AM
Re: Wiring LEDs, the right way.	52degrees	11/05/06 09:56 PM
Re: Wiring LEDs, the right way.	Robinhood150	11/06/06 05:57 AM
Re: Wiring LEDs, the right way.	BoostedInline6	11/06/06 05:03 PM
Re: Wiring LEDs, the right way.	Robinhood150	11/06/06 09:46 PM
Re: Wiring LEDs, the right way.	BoostedInline6	11/06/06 11:32 PM
Re: Wiring LEDs, the right way.	Robinhood150	11/07/06 06:36 AM
Re: Wiring LEDs, the right way.	ScottFW	11/07/06 10:50 PM
Re: Wiring LEDs, the right way.	Robinhood150	11/09/06 01:44 AM
Re: Wiring LEDs, the right way.	BoostedInline6	11/09/06 11:58 PM
Re: Wiring LEDs, the right way.	Robinhood150	11/10/06 04:05 AM
Re: Wiring LEDs, the right way.	BoostedInline6	11/13/06 06:55 PM
Re: Wiring LEDs, the right way.	BoostedInline6	11/17/06 09:14 PM
Re: Wiring LEDs, the right way.	kewlynx	04/16/07 04:22 AM

Moderated by 4Crawler, 4x4Wire, Dandeman, kewlynx

Hop To

4x4Wire Social: