Frank, if I knew that you put pics up here, I would have cleaned the car a bit <img src="/forums/images/graemlins/smile.gif" alt="" />


Not much to say... I didn't connect it at the beginning and this job has been pushed down and down in priority list. I have not done much research, how should it be connected. Normally there should be a valve controlled by ECU between canister and intake...

About springs.
I have replaced them for 3 times. First I put an extra torque bar, but still bent the springs. The solution came with D50 springs, that have 2 leaves coming to front pick up point and the leaves are 1 mm thicker