more 2.6 timing help (i'm a bit rusty)

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: more 2.6 timing help (i'm a bit rusty) [Re: RobG] #764818 11/15/06 06:43 PM

Joined: Apr 2003

Posts: 1,994

Under my wifes RODEO in EastTN

Bansil

Body Damage is Cool

A shot in the dark,is your coil getting power when the key is at the run position?

DO Isuzu's have seperate wires going to the coil circuit?One for cranking and then it switches over to a "run" circuit to power the coil after it's started?

How about: Is the oil pressure switch hooked up?It may bypass the switch for cranking,then when key is turned to run,it's reading oil pressure and shutting motor down.

Just trying to help.

Bansil

98 Rodeo(hers)
00 Rodeo(his)

Lisa's Rodeo

Entire Thread
Subject	Posted By	Posted
more 2.6 timing help (i'm a bit rusty)	RobG	11/12/06 10:05 PM
Re: more 2.6 timing help (i'm a bit rusty)	islandracer	11/12/06 10:23 PM
Re: more 2.6 timing help (i'm a bit rusty)	Richard Saylor	11/12/06 10:27 PM
Re: more 2.6 timing help (i'm a bit rusty)	RobG	11/13/06 12:55 AM
Re: more 2.6 timing help (i'm a bit rusty)	Anonymous	11/13/06 03:14 AM
Re: more 2.6 timing help (i'm a bit rusty)	JLEMOND	11/13/06 04:25 AM
Re: more 2.6 timing help (i'm a bit rusty)	RobG	11/14/06 02:05 AM
Re: more 2.6 timing help (i'm a bit rusty)	JLEMOND	11/14/06 04:08 AM
arghh! the problem still avades me	RobG	11/15/06 01:43 AM
Re: arghh! the problem still avades me	Anonymous	11/15/06 10:04 PM
Re: more 2.6 timing help (i'm a bit rusty)	Bansil	11/15/06 06:43 PM
Re: more 2.6 timing help (i'm a bit rusty)	JLEMOND	11/16/06 01:33 AM
Re: more 2.6 timing help (i'm a bit rusty)	litnin	11/16/06 02:10 AM
Re: more 2.6 timing help (i'm a bit rusty)	Bigpoppax2	11/16/06 04:54 PM
Re: more 2.6 timing help (i'm a bit rusty)	RobG	11/20/06 02:38 AM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: