Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Register Log In 4x4Wire TrailTalk Forums Isuzu 4x4 & SUV Tech Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2

Print Thread

Rate Thread

Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2 #765182 11/14/06 02:07 AM

Joined: Dec 1999

Posts: 582

Batavia, IL

Rick C

Rock Warrior

Has anyone replaced their own 3.2 lower manifold gasket?
How tough is it? I've got the manual and it does not look to bad.
Do I need anything besides the gasket and tools? Other gaskets ect.

I need to confirm that's the problem but I've seen this trick a couple of times already. I just need to get a code reader and make sure it comes up lean bank 1 or 2.

Rick C

PS hi Sean! Now that I have a daily driver I ready to play again!

99' Amigo V6 HT 4x4 Auto
Locked, Lifted and Lowered

Entire Thread
Subject	Posted By	Posted
Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	Rick C	11/14/06 02:07 AM
Re: Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	Amigo-2k	11/14/06 03:02 AM
Re: Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	Rick C	11/14/06 03:14 AM
Re: Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	strawmyers	11/14/06 03:30 AM
Re: Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	Rick C	11/14/06 03:57 AM
Re: Replacing cracked/leaking intake manifold gasket 2nd Gen 3.2	HCMP	11/14/06 08:30 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: