4X4 not working properly

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 4X4 not working properly [Re: dozier13] #765736 11/16/06 10:29 PM

Joined: Jan 2005

Posts: 1,528

Airdrie, Alberta......Canada

barak

Body Damage is Cool

Auto or manual hubs? If auto the C clips could have fallen off.If they are manual , did you have them fully locked in?

1996 Jeep Grand Cherokee 5.2 with mods.Hughes Air gap intake , 52MM TB , ford injectors, 2 3/4" lift, Doug Thorley headers , HID headlights with LED , HID fog lights , glow gauges , a few others

Entire Thread
Subject	Posted By	Posted
4X4 not working properly	dozier13	11/16/06 09:19 PM
Re: 4X4 not working properly	barak	11/16/06 10:29 PM
Re: 4X4 not working properly	dozier13	11/16/06 10:37 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.613s Queries: 16 (3.610s) Memory: 0.5967 MB (Peak: 0.6297 MB) Data Comp: Off Server Time: 2026-06-08 07:38:13 UTC
Valid HTML 5 and Valid CSS