IFS Front driveshaft question

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: IFS Front driveshaft question [Re: mudking82] #765770 11/17/06 01:57 AM

Joined: Jan 2000

Posts: 12,153

N. California. USA

4Crawler

Web Wheeler

Often a steel plug in there with a small hole. Maybe you could find a rubber stopper or a freeze plug of about the right size and shove it in there. Just make sure there is a small vent hole to let air and excess grease out.

r.c.brown@ieee.org
TruckEditor@tlca.org
Project: 4Crawler
4Crawler OffRoad - 4x4Wire discount code

Entire Thread
Subject	Posted By	Posted
IFS Front driveshaft question	mudking82	11/17/06 01:18 AM
Re: IFS Front driveshaft question	4Crawler	11/17/06 01:57 AM
Re: IFS Front driveshaft question	mudking82	11/19/06 12:27 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.257s Queries: 16 (4.254s) Memory: 0.5980 MB (Peak: 0.6309 MB) Data Comp: Off Server Time: 2026-11-04 10:38:04 UTC
Valid HTML 5 and Valid CSS