Clutch maybe?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Clutch maybe? [Re: CPOM] #765881 11/18/06 10:36 AM

Joined: Mar 2002

Posts: 417

Issaquah, WA

Billdo

Mudrunner

In both of my manuals, it states to use an engine hoist to hold up the motor when you disconnect the tranny, is this really necessary?

2000 Chevy Tahoe nothing special. 1990 Isuzu Amigo, 3" lift, 31x10.5x15 BFG All Terrain (Street), 33x12.5x15 (offroad), Pacesetter header, some ATM rash. More mods to come......

Entire Thread
Subject	Posted By	Posted
Clutch maybe?	Billdo	11/17/06 12:05 PM
Re: Clutch maybe?	madman	11/17/06 01:08 PM
Re: Clutch maybe?	CPOM	11/17/06 09:01 PM
Re: Clutch maybe?	Billdo	11/18/06 10:36 AM
Re: Clutch maybe?	Trooper-san	11/18/06 05:34 PM
Re: Clutch maybe?	94redrodeo	11/19/06 02:54 AM
Re: Clutch maybe?	Fujisawa_Rob	11/20/06 05:59 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.537s Queries: 16 (3.535s) Memory: 0.6053 MB (Peak: 0.6383 MB) Data Comp: Off Server Time: 2026-07-13 01:32:17 UTC
Valid HTML 5 and Valid CSS