Ok I went and looked at the second picture and you can see that I removed the back bolts but the front ones won't come out because of the boot on the CV joint. If I was to try and seperate the lower ball joint it would be imposible because the ball joint plate (for lack of a better word) slips in between the bottom part of the control arm meaning there is a top and bottom of the control arm and the ball joint plate slips in between them with the bolts going through all of it. I hope you can understand what I am trying to explain. Also if you look on WillV thread you can see the difference, on his you can see the bottom of the ball joint plate because it bolts to the bottom of the control arm.