Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Help with balljoint removal. [Re: igotskills] #766122 11/20/06 02:04 AM
Joined: Sep 2005
Posts: 416
Gizzy42 Offline
Mudrunner
I would replace them now and save having to tear it apart again later. Thats why I replaced mine. Noticed that they were starting to crack when I did the ball joints. Could only find 2 boots so only did the outters but they get the most wear at stock height.


--Dave

1999 Rodeo LS 3.2 4x4 5 Speed
32x11.50-15 BFG T/A KO on US Wheel 94 series
3" Lift - Rancho 9000x
Rear No-Slip Locker
Flowmaster 50 series SUV 2.25"

There is a very fine line between "hobby" and "mental illness." - Dave Barry
Re: Help with balljoint removal. [Re: Gizzy42] #766123 11/20/06 02:40 AM
Joined: Nov 2006
Posts: 20
I
igotskills Offline OP
Need a Spot
Where did you get your boots?

Re: Help with balljoint removal. [Re: igotskills] #766124 11/20/06 05:14 AM
Joined: Sep 2005
Posts: 416
Gizzy42 Offline
Mudrunner
Got mine from checkers cuz there are 2 of them close to me and I was in a rush. Had to go to both of them because each only had 1 boot in stock. Still holding up well a year later though. They came with a packet of grease but no metal bands, I bought those seperate along with the tool for them.


--Dave

1999 Rodeo LS 3.2 4x4 5 Speed
32x11.50-15 BFG T/A KO on US Wheel 94 series
3" Lift - Rancho 9000x
Rear No-Slip Locker
Flowmaster 50 series SUV 2.25"

There is a very fine line between "hobby" and "mental illness." - Dave Barry
Page 2 of 2 1 2







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.004s) Memory: 0.5986 MB (Peak: 0.6679 MB) Data Comp: Off Server Time: 2026-06-09 22:58:06 UTC
Valid HTML 5 and Valid CSS