Quote
I believe putting the jack under the lower control arm is to support it from falling after you remove the bj. I don't think it should be supporting the weight of the vehicle.


Leland, I suppose that the lower control arm is attached to the torsion bar and the lower arm is pressured upward by the torsion bar. If loosened, the arm must be moving up, not falling down, this is how I understand.

Oleg
Axiom 4WD 2004: OME shocks, 32" BFG Mudders, RockSliderz, OME929+2" spacers, Stinkyfab bent RE rear links, front ARB locker, rear No-Slip locker, DOR front axle lowering kit, custom middle section skid plate, IronMan torsion bars.
Deceased Rodeo'02 4WD.