Auxilary Oil Pressure Gauge

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Auxilary Oil Pressure Gauge [Re: NathanC] #768504 12/06/06 12:34 AM

Joined: Apr 2006

Posts: 43

Auckland New Zealand

Chris_Rob

Getting the Wheeling Fever

Sorry, what I was after is where on the engine can I best mount the sender unit. I can find an oil feed from the back of the block to the turbo, but that's too hard to get to.

'94 LWB 2800, 91 SWB glass-top 2500, 92 SWB soft-top 2500

(You can NEVER have too many Mitsi's!!)

Entire Thread
Subject	Posted By	Posted
Auxilary Oil Pressure Gauge	Chris_Rob	11/29/06 10:33 PM
Re: Auxilary Oil Pressure Gauge	NathanC	11/30/06 01:26 PM
Re: Auxilary Oil Pressure Gauge	Chris_Rob	12/06/06 12:34 AM
Re: Auxilary Oil Pressure Gauge	torquemonster	12/06/06 02:06 AM
Re: Auxilary Oil Pressure Gauge	Chris_Rob	12/06/06 03:05 AM

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.507s Queries: 16 (3.505s) Memory: 0.6011 MB (Peak: 0.6341 MB) Data Comp: Off Server Time: 2026-06-08 17:51:31 UTC
Valid HTML 5 and Valid CSS