drive shaft when lifting

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: drive shaft when lifting [Re: mlclark] #768591 11/30/06 04:41 AM

Anonymous

Unregistered

so all i need to get are some shims and new u joints thats it? i read that you need to get the shaft made longer or something like that if all i need are shims and u loints where can i get them. and where can i find the tool to crank up the torsion bars?

Entire Thread
Subject	Posted By	Posted
drive shaft when lifting	Anonymous	11/30/06 03:22 AM
Re: drive shaft when lifting	mlclark	11/30/06 03:58 AM
Re: drive shaft when lifting	TrooperJ	11/30/06 04:18 AM
Re: drive shaft when lifting	mlclark	11/30/06 04:34 AM
Re: drive shaft when lifting	Anonymous	11/30/06 04:41 AM
Re: drive shaft when lifting	strawmyers	11/30/06 04:49 AM
Re: drive shaft when lifting	Pyro4117	11/30/06 05:42 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.475s Queries: 16 (3.472s) Memory: 0.6032 MB (Peak: 0.6362 MB) Data Comp: Off Server Time: 2026-06-02 12:40:27 UTC
Valid HTML 5 and Valid CSS