Today

- Fabbed the exhaust down pipe from the crossover. Used the stock down pipe flange and some cutting and welding. First O2 sensor is in nearly the stock location for a 3.4. Still need to make the line from the down pipe to the cat which is in the stock 3.0 location.

- terminated the electrical connections and finalized the routing. Saldered the wires instead of crimping. Just a personal preference.

- hooked up and bled the clutch.

- Fabbed a new fuel line from the fuel filter to the engine flex line. Rerouted the line to clear the exhaust.

Planning to start the engine tomorrow. Maybe ready to drive by thursay or friday.