Head Gasket for 2.3l vs. 2.6l Head Swap

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Head Gasket for 2.3l vs. 2.6l Head Swap #769326 12/03/06 06:08 PM

Joined: Jun 2005

Posts: 9

St. Paul, MN

mgpman

Need a Spot

I was going to swap an available and cheap 2.3L, 4zd1-c1, head onto my 1988, 2.6L, 4ze1, and I understand the probable increased compression, timing, etc. issues from my search on this great site, but my question is which head gasket should I use? For example, the Felpro 9496 for the 2.3 or the 8215 for the 2.6? Thanks

mgpman
88 Trooper LS

Entire Thread
Subject	Posted By	Posted
Head Gasket for 2.3l vs. 2.6l Head Swap	mgpman	12/03/06 06:08 PM
Re: Head Gasket for 2.3l vs. 2.6l Head Swap	JLEMOND	12/03/06 06:33 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 4.239s Queries: 15 (3.514s) Memory: 0.5942 MB (Peak: 0.6272 MB) Data Comp: Off Server Time: 2026-06-17 04:51:51 UTC
Valid HTML 5 and Valid CSS