Front Pinion Angle

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Front Pinion Angle [Re: 4Crawler] #769425 12/05/06 03:43 AM

Joined: Nov 2003

Posts: 99

South Austin, TX

TATER

Getting the Wheeling Fever

Pinion flange is @ 6 degrees. T-case flange is @ 6 degrees.

Problem being they arent parallel. It seems as if the dropped hanger is dropped too far.

Does a 12 degree shim sound too far fetched ?

Entire Thread
Subject	Posted By	Posted
Front Pinion Angle	TATER	12/04/06 03:37 AM
Re: Front Pinion Angle	4Crawler	12/04/06 04:36 PM
Re: Front Pinion Angle	TATER	12/05/06 03:43 AM
Re: Front Pinion Angle	4Crawler	12/05/06 03:46 AM
Re: Front Pinion Angle	TATER	12/05/06 03:55 AM
Re: Front Pinion Angle	4Crawler	12/05/06 04:24 AM
Re: Front Pinion Angle	TATER	12/05/06 05:03 AM
Re: Front Pinion Angle	4Crawler	12/05/06 05:32 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.475s Queries: 16 (3.473s) Memory: 0.6066 MB (Peak: 0.6395 MB) Data Comp: Off Server Time: 2026-06-16 09:13:39 UTC
Valid HTML 5 and Valid CSS