Just an update....

I replaced the slave, as it should buy me some time.

Last time the slave was replaced, I let the fluid drain from the slave line so there was new fluid in the system. This time, I also purged the fluid from the damper-- cracked the bleeder and let it flush through there, so hopefully that might help. The fluid that came out of the damper was extremely dirty and milky looking, probably contaminated with water? Bled forever with the Mighty Vac after that.

Anyway, the Rodeo is back in action, and the clutch *seems* more buttery smooth in the pedal action... Read that thread on taking the damper out, very interesting idea, definitely makes the circuit simpler, although getting rid of the horizontal routing doesn't apply in this case.


Tom


1988 4Runner 22R-E W56
1989 4Runner 22R-E A340
1995.5 Rodeo 3.2L 5spd
--------------------