ok i got a a chance to work on it last night a lil...heres the whats going on...for steering and such everthing there is ok/decent besides inner tie rod ends...could use replacing but were fine on the other truck. my ball joints are good. i put the tires from my other truck on there (they were recently balanced) tire psi is 40lbs all the way around. (very cold weather) my alignment is off by the way. the popping noise is gone. as for the brakes. fluid is good, they have been bled. master cylinder is 6months old. i think it maybe the vacum booster? <img src="/forums/images/graemlins/confused.gif" alt="" />

the vibration is still present. it is starting around 20mph, and if you ask me, quite violent, so violent, that i haven't been driving it. when i speed up it seems to smooth out a little. i don't even hit bumps and the vibration/shaking begins!!! where do i go from here? should i go ahead and replace the inner tie rod ends? and the shocks? they are ranchos...so i may just get the bushings there and all the bearins are fine...what else should i check?