Energy suspension vs. Rubber?

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Energy suspension vs. Rubber? #770246 12/07/06 05:58 AM

Joined: Jan 2005

Posts: 129

Phoenix, Arizona

1994Runner4X4 Offline

Wheeler

When I was replaceing all four of my tie rod ends I noticed mycontrol arm bushings are kinda rotting out from the old power steering leak it had when I bought it. Anyone had much luck w/ the urethane or should I just stick with OEM rubber? Urethane claime to be resistant to oils and claim to last longer.

1994 Toyota 4Runner SR5 3.0L M/T 4X4 w/ Full OME Sus & 1-1/2"BJS

1993 Toyota Pickup 2.4L M/T

1999 Jeep XJ "Classic" 4.0L A/T 4X4

Entire Thread
Subject	Posted By	Posted
Energy suspension vs. Rubber?	1994Runner4X4	12/07/06 05:58 AM
Re: Energy suspension vs. Rubber?	fourwd1	12/13/06 03:27 AM
Re: Energy suspension vs. Rubber?	Anonymous	12/13/06 03:23 PM

Moderated by 4x4Wire, Adam F, Dandeman, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.508s Queries: 15 (3.505s) Memory: 0.5964 MB (Peak: 0.6294 MB) Data Comp: Off Server Time: 2026-06-21 04:46:56 UTC
Valid HTML 5 and Valid CSS