absolutly be very safe with this one i would use the strapes on the frame rail, or how i did this by my self in the driveway was took a screw driver across the floor board hole and looped two strap'es around the tranny transfercase and lower it from there aboout about 2' to a creaper so i could roll the tranny easier.

you can rent a tranny jack, or just lower the truck low enough to use the jack stands that you have available. i would recomend cleaning the tranny to so you can cheak for some leaks and the such.



you aint kidding, back then i could bench 250 easy and i could barely lift the tranny combo off the creaper i had to slid it, its heavy, very heavy.

nick