What sensors or switches are affected by the pcv valve?
My wife's 4runner has a terrible cut and surge condition that's bad enough to bark the tires repeatedly coming up the driveway(err,err,err,err). pretty much undriveable on the road when it's acting up. The "surging" has been very erratic and intermittent for years. May go months between bouts. Gotten really bad lately. I've searched and read on the board about similar problems. I get a code 14 and have tried two different coil/igniter's with same results. I did notice today that if I pull the pcv valve the missing stops. So, I reset the computer codes and cranked the engine with the pcv disconnected: the code didn't come back! How could this affect the coil/igniter? You guys have any ideas on what the true nature of this problem could be? Thanks for your input, Aaron