|
|
|
|
Re: 91 22re pcv question: engine cutting and surging
[Re: trythis]
#770350
12/08/06 05:25 PM
|
Joined: Nov 2004
Posts: 5
OP
Need a Spot
|
Yeah, did that 6or 8 months ago and it seemed to fix the problem but it came back. It's been so erratic it's hard to pinpoint. Continual now for the most part. The PCV valve is still in the hose going to the intake manifold but pulled from the trashed grommet in the valve cover.
With the engine running I can work the linkage to give it some light throttle with a noticeable surge; pull the PCV and the surge quits; put the PCV back in placeon valve cover and surging resumes. It doesn't matter if my finger is over the valve cover end of the PCV valve or not the surging stops(it is pulling pretty strong toward the intake). I also drove it up and down the driveway(steep)with the PCV valve pulled from the valve cover as mentioned above with no hesitaions or stumbles and no trouble codes. For "fits" and giggles, I'm going to pull the EGR and clean/check it out some. Any and all ideas are appreciated. Thanks
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 4.210s Queries: 16 (4.207s) Memory: 0.6001 MB (Peak: 0.6331 MB) Data Comp: Off Server Time: 2026-11-15 16:45:01 UTCValid HTML 5 and Valid CSS