Quote
Remove all the screws holding the trim panel to the door, there aren't that many, you'll have to remove the "covers" to some of them, but they're right there in front of you, look like round plastic covers, cause they are <img src="/forums/images/graemlins/wink.gif" alt="" />.


IIRC, on my 90 (1st gen) I have 2 screws holding the arm rest and one screw holding the plate for interior door pull. The switch panels all came off easily if pried away carefully from the door panel.

As was noted, don't force it. If anything, take a picture of where you're at, circle what's not coming undone and post it here. I'm sure someone will have done it before and will give you more insight on how to remove it. <img src="/forums/images/graemlins/kewl.gif" alt="" />

HTH.

Off Roader
98 Montero with the Winter Package
89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events
96SR (3.15:1 xcase, 35's) gone to the rust gods
96SR Build Up Thread
Old web page
Old web page