98+ heater blower motor removal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: 98+ heater blower motor removal [Re: CPOM] #770581 12/09/06 03:40 AM

Joined: Sep 2003

Posts: 1,214

JLEMOND

Body Damage is Cool

HEY CHRIS ,YOU DO NOT HAVE TO PULL HTE DASH OR ANYTHING MAJOR, YOU MAY HAVE TO REMOVE THE LOWER DASH VALANCE ,DEPENDING ON YOUR TRIM LEVEL, THE MOTOR ITSELF IS HELD TO THE BLOWER HOUSING BY 4 VERTICLE SMALL SCREWS ,REMOVE THEM AND THE MOTOR SHOULD DROP RIGHT OUT, I THINK THEY ARE PHILLIPS HEAD , ANYWAY IT IS NOT A HARD JOB TO DO. JERRY

Entire Thread
Subject	Posted By	Posted
98+ heater blower motor removal	CPOM	12/08/06 10:19 PM
Re: 98+ heater blower motor removal	Gizzy42	12/09/06 12:20 AM
Re: 98+ heater blower motor removal	JLEMOND	12/09/06 03:40 AM
Re: 98+ heater blower motor removal	Bigpoppax2	12/12/06 10:36 PM

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 3.484s Queries: 16 (3.482s) Memory: 0.5970 MB (Peak: 0.6299 MB) Data Comp: Off Server Time: 2026-06-14 13:07:50 UTC
Valid HTML 5 and Valid CSS