Bent front crossmember

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Re: Bent front crossmember [Re: Ryan_Vazquez] #770739 12/10/06 01:38 AM

Joined: Dec 2003

Posts: 836

Tucson,Az.

abnormaltoy Offline

Rock Warrior

Mine are 3x5 1/4 wall. It fit pretty well, not too much trimming. I had a friend machine the receivers, I pressed them in and welded them.

I would rather suffer the consequences of a Conservative?s error, than suffer the consequences of a Socialist's intent.

Entire Thread
Subject	Posted By	Posted
Bent front crossmember	Ryan_Vazquez	12/09/06 02:51 AM
Re: Bent front crossmember	missouriman	12/09/06 01:14 PM
Re: Bent front crossmember	eightyeight	12/09/06 06:32 PM
Re: Bent front crossmember	abnormaltoy	12/09/06 06:40 PM
Re: Bent front crossmember	Ryan_Vazquez	12/10/06 01:00 AM
Re: Bent front crossmember	abnormaltoy	12/10/06 01:38 AM

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 9.118s Queries: 16 (3.598s) Memory: 0.6027 MB (Peak: 0.6357 MB) Data Comp: Off Server Time: 2026-07-16 16:16:46 UTC
Valid HTML 5 and Valid CSS