Turning off ABS warning light

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Page 2 of 2

Re: Turning off ABS warning light [Re: 4Play] #771916 12/22/06 08:02 PM

Joined: Sep 2002

Posts: 1,873

Walnut Creek, CA

holger

Body Damage is Cool

Quote

I also have the ISC warning light on too.

Ashby, I know how to turn the ISC warning off. You need just pull the ISC fuse out of the electric box under the hood at the passenger side. I did it on my Axiom when I was removing the ISC shocks. No warning, everything is clear.

As for the ABS, may be the same way is applicable to the ABS lights. Find the ABS fuse, try to remove it and see how it works. But do this on your own risk.

Oleg
Axiom 4WD 2004: OME shocks, 32" BFG Mudders, RockSliderz, OME929+2" spacers, Stinkyfab bent RE rear links, front ARB locker, rear No-Slip locker, DOR front axle lowering kit, custom middle section skid plate, IronMan torsion bars.
Deceased Rodeo'02 4WD.

Re: Turning off ABS warning light [Re: Bigpoppax2] #771917 12/23/06 03:47 AM

Joined: Dec 2006

Posts: 13

henry44

Need a Spot

Quote

I am going to use a old proportioning valve off an older trooper that has two inputs and front and a rear and then it has two outputs for the front brakes and one for the rear. This has the correct fittings and everything to be able to remove your ABS pump completely.

Tad already did this on his 94 Trooper and said it made a big difference in his braking performance.

Joe

Do you have a year range for the proportioning valve? This sounds like something I want to know more about.

Thanks

Henry

Page 2 of 2

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social: