Quote
<img src="/forums/images/graemlins/confused.gif" alt="" /> Did you use a new gasket,are all nuts and bolts tightened,did you accidently pull the air intake hose loose somewhere before the tb?When they say check the coolant,you need to have the front of the truck raised up with the rad cap off,heater on,and run the motor.Watch for air escaping from rad.Good luck,hope you solve your problem! <img src="/forums/images/graemlins/cheers.gif" alt="" />


We didnt use a new gasket, but we did replace it with a bead of silicone sealer. we did tighten down the bolts, and i have checked them multiple times. also, when i replaced the fuel pressure damper, we flushed the cooling system, and put fresh in. that was in january, so ya. idk. im going to check the IAC tomorrow, when im in class, and i think im going to check about replacing the throttle body gasket. thanks. <img src="/forums/images/graemlins/cheers.gif" alt="" />

formerly 277000_yota
Old enough to know better, but still to damn arrogant to care...
]www.cardomain.com/ride/2614269
'90 'Yota 4X4 (10/31/05-09/10/08 R.I.P)
'98 'Yota t-100. 3.4, 5 sp. 4x4, 2 in. Toytec with BFG A/T 265/70R16s